Axles

Leaf spring, front 7 leaf, 1-3/4" wide 805lb capacity

DESCRIPTION   Spring Capacity = 805 Pounds Width = 1-3/4" # Leaves = 7 Measures (A/B) = 19-7/8" x 19-7/8" Pack Thickness (D) = 1-9/16" Bushings Included Jeep OEM 999526 / 999529 Sold Per Side - Order Quantity 2 for a...

Leaf spring, front 10 leaf, 1-3/4" wide 1130lb capacity

1955 - 1975 CJ5, CJ6, DJ5, DJ6 front leaf spring - 10 leaf, 1130 lb capacity   MADE in the USA!   1952-75 M38A1, CJ5/6, FC 150 Spring Capacity = 1130 Pounds Width = 1-3/4" # Leaves = 10 Measures (A/B) = 19-7/8" x 19-7/8" Pack...

Positraction anti-chatter additive

Positraction anti-chatter additive Question: Can you run regular gear and axle oil with a limited-slip? You could answer "No" and be correct—or you could say, "Yes, but you'll need to add Yukon Gear & Axle friction modifiers." Clutch-type...

Dana 25/27/30 differential cover, Dana/Spicer

Dana 25/27/30 (front or rear) differential cover, Dana/Spicer. Includes new bolts and plug

Dana 44 differential cover, Dana

Dana 44 differential cover, Dana/Spicer Includes new bolts and plug

Aluminum core and silicone beaded Dana 44 differential cover gasket

These are awesome, I run them on all my Jeeps! These differential gaskets make paper gaskets and RTV a thing of the past by manufacturing high-quality, aluminum core gaskets with an outer silicone coating. The real secret to success is the elastomer...

Aluminum core and silicone beaded Dana 25/27/30 differential cover gasket

These are awesome, I run them on all my Jeeps! These differential gaskets make paper gaskets and RTV a thing of the past by manufacturing high-quality, aluminum core gaskets with an outer silicone coating. The real secret to success is the elastomer...

Brake spring, lower anchor

Fits: Jeep M38-A1 (1952-1963) w/ 9″ Brakes. Jeep CJ-3B (1953-1968) w/ 9″ Brakes. Jeep CJ-5 (1955-1965) w/ 9″ Brakes. Jeep CJ-6 (1955-1965) w/ 9″ Brakes.   Front or Rear Lower Brake Shoe Spring

Brake shoe eccentric

Fits: Willys M38-A1 (1952-1963) w/ 9″ Brakes. Jeep CJ-3B (1953-1968) w/ 9″ Brakes. Jeep CJ-5 (1955-1965) w/ 9″ Brakes. Jeep CJ-6 (1955-1965) w/ 9″ Brakes.   2 Required Per Wheel.

Brake drum swage cutter kit, 1/2" stud

This is a low cost tool for you to cut the factory swage off the brake drum befopr pressing out the lug studs to change brake drums. The machine tool for this job is over $100, so we decided to give you another alternative. Slow on the drill press with...

Dana 44 pinion shim set, cover gasket and nut

Fits Jeep: Jeep Wrangler (TJ) (1997-2006) w/ Dana 44 Rear Axle; w/ Standard or Trac-Lok. Jeep Wrangler (YJ) (1987-1995) w/ Dana 44 Rear Axle. Jeep Cherokee (XJ) (1987-1990) w/ Dana 44 Rear Axle. Jeep Comanche (MJ) (1986-1992) w/...

Hub puller for tapered axles

Hub puller needed to pull hubs off tapered axles. These are not he cheapie version that typically break before you can finish the job. These are quality made pullers that you will have for a lifetime.