Rear shackles, HD greasable

This pair of HD greaseable, rear 2-1/2" wide leaf spring shackles from that fit 76-86 Jeep CJ5, CJ7, and CJ8. Black poly bushings.

Jeepster Commando 2" lift kit

Jeepster Commando 2" lift kit This is a true 2" lift kit with new springs, shocks and u-bolts. You will have to answer some questions, Please answer and add in the comments section as you order:   Front spring width: 1-3/4" wide 2"...

Front spring, main eye bolt kit for 2" front spring, 1971-73

Front spring, main eye bolt kit for 2" front spring, 1971-73 This is also the bolt kit you need for the shackle ends of the spring (shackle to frame mount and shackle to spring) 1971-1973 Jeepster/Commando

Rear spring, main eye bolt kit for 2-1/2" rear springs, 1967-73

Rear spring main eye (not shackle end) bolt kit for all 2-1/2" rear springs, Jeepster Commando 1967-1973   Zinc plated grade 5 hardware with steel lock nut   Kit will do both rear springs  

Front spring, main eye bolt kit for 1-3/4" front spring, 1967-70

Front spring, main eye (not shackle end) pivot bolt kit for 1-3/4" front springs, 1967-1970 Jeepster /Commando Zinc plated Grade 5 hardware with steel lock nut, will do both front springs   #8 and 9 in the diagram

Steering stabilizer replacement cylinder

SPECIFICATIONS Shock Boot Included:Shock Boot Not Included Single / Dual:Single Beam Distance (Low):Twin Tube Brackets Included:Brackets Not Included Position:Front Fitment:Direct Fit Type:Stabilizer Only Series:Extreme-Duty Series Rubicon...

Shock stud, threaded

Generic shock stud. You can replace a bent or broken stud by welding this in place or thread it in to a nut. Replace the early cotter pin shock stud with these to eliminate the frustration! Can add to spring plate for dual shocks or a sway bar end...

Front shock absorber

Front Shock absorber for: Frontend or rearend Ross steering Jeeps, stock height and Rearend shock for Ross steering Jeeps, stock height   Quality Monroe 31000 series gas charged shock with 10 stage valving.   How to determine...

Rear shock absorber for Saginaw steering Jeeps

Rear Shock absorber for front steering Jeeps, stock height Quality Monroe 31000 series gas charged shock with 10 stage valving.   How to determine if you have a front or rear steering Jeep: Front steering Jeeps, the steering box either...

Sway bar rebuild kit

Sway bar rebuild kit. All you need to rebuild and restore your factory sway bar bushings

Sway bar to frame bushing

Sway bar to frame bushing, 13/16" ID.

Spring bushing, 2" spring shackle pivot end

Front spring bushing for pivot (shackle) end for 2" springs found on late 1969 to 1973 Jeepster/Commandos