Seals & Weatherstripping

Transfer case shift lever weather seal, Dana 20 U-Pattern

Transfer case shifter under seal. This is the seal that goes UNDER the flat dust cover seal that you would see in the interior (974073). This keeps the actual weather out of the interior, while the 974073 is more of a trim seal. It mounts in an upside...

Jeepster/Commando half cab rear corner seal set

Half cab rear corner seals set. FINALLY!!! some seals for the half cab!   These are the seals at the back corner of the half cab that seal to the top rail of the bed.   #25 and #26 in the diagram for both...

Rear hatch tee handle seal

Rear hatch tee handle latch seal. This seals the slam latch to the rear hatch   *****Secondary picture, Tee handle for demonstration purposes only, not included*****

Upper door seal retainer super flat headed screws

Upper door and windshield pillar seal retainer super flat headed screws. #7 in both diagrams, hardtop and half cab. These can also be used for the windshield pillar seal retainer. The super flat heads fit under the seals nicely.

Windshield top flange pinch weld trim, black

Windshield pinch weld trim for top of windshield. These are always missing. #2 in the diagram   Also looks great on the bottom of the cowl pinch weld if you do not have a dash pad covering it

Clutch fork boot, 225 V6

Clutch fork boot for 225 V6 and J-Series with T-18 4 speed 1969-71

Shifter boot kit, Jeepster/Commando 3 speed

Shift boot kit includes new 3 speed shift boot, new shift boot retainer ring and 4 stainless steel screws to mount them. Everything you need to freshen up and seal up your transmission shifter!!   Partsdude4x4 exclusive

Front balancer/front cover neoprene seal, 225 V6

225 V6 front cover balancer seal. NO MORE ROPE SEALS!!  This modern neoprene sea does the place of the pesky )and leaky) rope seal and shedder ring.

Half Cab bulkhead seal generic closed cell foam, per foot

Half Cab bulkhead seal material. This is a generic closed cell foam for all types of uses!  Top and bottom of bulkheads, you can stack it as it has one side peal and stick. Header seals for both hardtops, half cabs and even...

Shifter boot, Jeepster/Commando w/ 3 spd floor shift

Transmission boot for Jeepster/Commando with 3 speed floor shifters.

Lower door seal push in clip

Push in clips for lower door seals on Jeepster/Commando. These pesky little things break off occasionally, now you can order and replace as needed!  The slip right back into the recess in the seal.   Partsdude4x4 LLC exclusive!!

Fuel filler floor gasket and retainer plate, 1967-73 Jeepster/Commando

Fuel filler/vent floor gasket and retainer plate. #17 and 18 in diagram   Made in the USA by Partsdude4x4 LLC