Engine

Heater hose fitting, 1/2" NPT x 5/8" barbed, straight

Heater hose fitting, 1/2" NPT x 5/8" barbed, straight

Heater hose fitting, 3/8" NPT x 5/8" barbed, straight

Heat hose fitting, 3/8" NPT x 5/8" barbed, straight

Heater hose fitting, 1/2" NPT x 5/8" barbed, 90 degree

Heater hose fitting, 1/2" NPT x 5/8" barbed, 90 degree

Ignition coil, 12V

12 volt ignition coil

Oil Pan Drain Plug

Oil Pan Drain Plug Fits: Jeep CJ (1966-1978) w/ 3.8L engine. Jeep CJ (1971-1986) w/ 4.2L engine. Jeep CJ (1971-1981) w/ 5.0L engine. Jeep C104 Commando (1972-1973) w/ 4.2L or 5.0L engine. Jeep SJ &...

Heater Hose Kit

Heater Hose Kit Includes: 7' of premium heater hose 5/8" 4 Stainless steel hose clamps   FYI: Jeepster Commando lengths: 37" from outside heater core tube to back of intake manifold elbow fitting 34" from inside heater core tube to water...

Heater Hose, per foot

Premium 5/8" heater hose, black and sold by the foot. Typically you would need 6-7 feet for both lines, measure just to be sure before ordering.

Oil fill cap

Oil fill cap 225 V6    Fits Vintage Jeep: Jeep CJ-5 (1980-1983) w/ GM 2.5L engine. Jeep CJ-7 (1980-1983) w/ GM 2.5L engine. Jeep CJ-8 (1981-1983) w/ GM 2.5L engine. Jeep CJ-5 (1966-1978) w/ 3.8L engine. Jeep...

Water pump S-6 motor

Fits 72-74 Jeep CJ5,CJ6 and Jeep Commando with 232 or 258 cubic inch engines

Throttle return spring

Fits: Jeep CJ (1983-1986) w/ 2.5L engine. Jeep Wrangler (YJ) (1987-1990) w/ 2.5L engine. Jeep Cherokee (XJ) (1984-1996) w/ 2.5L engine; w/ Carburetor. Jeep Comanche (MJ) (1986-1992) w/ 2.5L engine; w/ Carburetor.  

Jeep CJ Hood Insulation

1976-1986 Jeep CJ-5, CJ-7 & Scrambler CJ-8 hood insulation  Replacement hood insulation, helps cut down on heat and engine noise.Just apply glue to hood and insulation piece and stick it right on!May require slight trimming to fit perfectly...

Hood to Grill Bumper/Grommet

Hood / Grille Grommet (1/4" Thick)   Fits: Jeep CJ (1981-1986); Left or Right side. Jeep Wrangler (YJ) (1991-1993); Left or Right side.