Transmission & Transfer case

Transfer case shifter master boot kit

Transfercase master boot kit. Include all 3 rubber boots/seals for your U-Shaped shift pattern Dana 20   Top flat boot Downward facing weather seal Round shifter box dust/dirt seal   #4 in diagram plus # 3 and #4 in second body diagram

Transfer case shifter dust cover

Transfer case shifter dust cover. This is the flat rubber circle that slides down the shifter and covers the shifter box to keep dust and dirt out. #4 in the diagram

TH400 Automatic to Dana 20 adapter

TH400 automatic to Dana 20 adapter It is not at all uncommon for the stock Jeep adapter housings to break in any number of areas due to the thin stock adapter casting. This strengthened replacement addresses this problem with a thicker, more robust part...

T14 Mainshaft pilot roller bearing kit (21)

Fits: Jeep CJ-5 (1966-1967) w/ T86 Transmission. Jeep CJ-5 (1967-1972) w/ T14 Transmission. Jeep CJ-5 (1971-1975) w/ T15 Transmission. Jeep CJ-6 (1966-1967) w/ T86 Transmission. Jeep CJ-6 (1967-1972) w/ T14 Transmission...

Clutch cable anchor bracket, Type 3, 225 V6

Clutch cable anchor bracket, type 3 for 225 V6.  This is the magical bracket that Jeep finally evolved to eliminate all the bellcranks and pivot points with in the earlier clutch mechanisms. This braccket attaches to the the T14 or T86...

Transfer case shift lever weather seal, Dana 20 U-Pattern

Transfer case shifter under seal. This is the seal that goes UNDER the flat dust cover seal that you would see in the interior (974073). This keeps the actual weather out of the interior, while the 974073 is more of a trim seal. It mounts in an upside...

Shift knob, T90/T14/T86/T15

Shift knob for 3 speed T90/T14/T15/T86 transmissions. 5/16-24 thread with black oxide jam nut included Knurled edges

Dana 20 twin stick kit, Jeepster/Commando with manual trans only

Description Jeep D-20 Jeepster / Commando stainless steel twin-stick shifter Made for the Jeep Dana 20 transfer case W / 3 speed tranny. This shifter fits the Jeep D-20 that has the shifter mount on an extension housing that sticks forward of the...

Transfer case shift rail detent ball, Dana 18/20/300

Transfer case shift rail detent ball   Fits Jeep: Jeep Cherokee (XJ) (1984-1986) w/ T4 or T5 Transmission. Fits Vintage Jeep: Willys MB (1941-1945) w/ Dana 18 Transfer Case. Willys M38 (1950-1952) w/ T90 Transmission...

Automatic console shifter indicator, 1966-71 Jeepster/Commando

Replace that worn and faded shift indicator with our new reproduction console shift indicator, automatic transmission.  Fits: 1967-1971 Jeepster Commando w/ automatic transmission only and console. We also sell the...

Automatic transmission cooler kit

Automatics transmission cooler kit   This kit is for your automatic transmission and for radiator without a transmission cooler provision.   Fits nicely in front of the radiator inside the Jeep grill shell with a 22"...

Clevis pin and cotter pin kit

Steel clevis pin and cotter pin  kit. Jeep used this pin all over the Jeep for year. Here is a 5/16" steel pin with the correct length (31/32") and proper working length (head to cotter pin hole)