Pitman arm lock washer

Pitman arm lock washer, power steering Fits Vintage Jeep: Jeep CJ-5 (1972-1986). Jeep CJ-6 (1972-1975). Jeep CJ-7 (1976-1986). Jeep CJ-8 (1981-1986). Jeep SJ & J-Series (1972-1991). Jeep Wrangler...

Pitman Arm, power steering stock replacement

Fits stock 70-73 Jeepsters and Commandos and 72-86 CJ's with power steering.  

Power steering coupler with Hardware 998710K

Steering coupler with hardware, fits 1976-86 CJ's, 1973-86 FSJ, 1970-1973 Jeep Commando with power steering

Shackle kit (rear spring)

Rear shackle kit for 2 1/2" springs.  Includes numbers 5, 6, 7, & 4 in the diagramFits rear springs with 2 1/2' springs that came on 67-73 Jeepsters and Commandos and 1976-1986 CJ-7. Kit includes shackle, bushings, bolts, and nuts. Kit is for...

Steering Column Lower Bearing Kit

Fits: Jeep CJ (1976-1986). Jeep Wrangler (YJ) (1987-1995). Jeep SJ & J-Series (SJ) (1974-1991).  

Steering Column to Firewall Seal

Steering Column to Firewall Seal, fits 1974-1995 CJ's, J Truck, Wagoneer, YJ

Steering knuckle/manual steering box lube

Genuine John Deere Cornhead Grease. This is what you have been looking for to lubricate your steering knuckles with Bendix/Rezeppa type steering u-joints. This is a soft grease specially made for these type of demands. This will also work in your manual...

Steering stabilizer kit

Steering stabilizer kit Multiple mounting options for manual or power steering.

Steering stabilizer replacement cylinder

SPECIFICATIONS Shock Boot Included:Shock Boot Not Included Single / Dual:Single Beam Distance (Low):Twin Tube Brackets Included:Brackets Not Included Position:Front Fitment:Direct Fit Type:Stabilizer Only Series:Extreme-Duty Series Rubicon...

Steering Tie Rod End

Steering Tie Rod End   Fits: Jeep (1941-1986); w/ Right Hand Thread; At Pitman Arm; Driver Side.

Steering Tube & Clamps

Steering tube and 2 clamps, tube is 4.5 inch long 11/16" thread.  Letter G in the diagram  

Tie Rod Clamp

Tie rod clamp. Inner or Outer Tie Rod Clamp for Left or Right Tie Rod Assembly; Includes Clamp and Hardware    Fits: Willys MB (1941-1945). Willys M38 (1950-1952). Willys M38-A1 (1952-1963). Jeep CJ-2A (1945-1949). Jeep CJ-3A...