Clutch alignment tool

Clutch alignment tool, 9/16" pilot, 1-1/8" 10 spline   Fits Jeep: Jeep Wrangler (YJ) (1991) w/ 4.0L engine. Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine. Jeep Cherokee (XJ) (1987-1991) w/ 4.0L engine. Fits Vintage...

Clutch arm return spring V6

225 V6 Clutch Arm return spring

Clutch cable 49 3/16"

Fits: Jeep C101 Commando (1966-1971) w/ 4-134 F-Head engine; w/ T86 Transmission; 49-3/16" Long. Jeep C101 Commando (1966-1971) w/ 6-225 engine; w/ T86 or T14 Transmission; w/ Diaphragm Style Pressure Plate; 49-3/16" Long.  

Clutch cable 84", made in USA!! With redesigned attachment point.

New design clutch cable made in the USA! This cable comes with re-designed pedal end. It is attached with a heavy duty spring clip instead of the press in clip that fails immediately.  If the hole in your floor board is worn out and will not hold...

Clutch Control Cable

Clutch control cable   Fits: Jeep Truck (1954-1964) w/ 6-225 engine. Jeep Station Wagon (1954-1964) w/ 6-225 engine. Jeep CJ-5 (1966-1971) w/ 6-225 engine. Jeep CJ-6 (1966-1971) w/ 6-225 engine. Jeep C101...

Clutch Control Cable, 13 5/8" Long

Clutch control cable   Fits: Jeep Truck (1954-1964) w/ 6-225 engine. Jeep Station Wagon (1954-1964) w/ 6-225 engine. Jeep CJ-5 (1966-1971) w/ 6-225 engine. Jeep CJ-6 (1966-1971) w/ 6-225 engine. Jeep C101...

Clutch cross shaft grease seal

Clutch cross shaft end seals.      

Clutch disc

Clutch disc, fits 195-1971 CJ-5 and CJ-6 , 1967-1971 Jeepster Commando with V-6 Dauntless 225 motor.  Number 1 in the diagram

Clutch fork

Fork clutch lever  fits 1966-1971 Jeepsters Commando, 1965-1971 CJ-5, CJ-6.  Number 4 in the diagram.

Clutch Fork 4cyl

Clutch Fork Fits: Willys MB (1941-1945) w/ 4-134 L-Head engine. Willys M38 (1950-1952) w/ 4-134 L-Head engine. Willys M38A1 (1952-1963) w/ 4-134 F-Head engine. Jeep CJ-2A (1945-1949) w/ 4-134 L-Head engine. Jeep...

Clutch fork boot, 225 V6

Clutch fork boot for 225 V6

Clutch Kit, 134ci, 9.25" diameter

Fits: Willys M38-A1 (1960-1963) w/ 4-134 F-Head engine; w/ 9-1/4″ Clutch. Jeep CJ-3B (1960-1968) w/ 4-134 F-Head engine; w/ 9-1/4″ Clutch. Jeep CJ-5 (1960-1971) w/ 4-134 F-Head engine; w/ 9-1/4″ Clutch. Jeep...