Brakes

Proportioning valve kit, left hand side mount, disc/drum

Proportioning valve kit, left hand side mounted, disc drum This fits right on our disc/drum master cylinder 1321HK For use with 9/16" & 1/2" Ports Master Cylinders Left Mount Brass Proportioning Valve Steel Lines, Bracket Proportioning Valve...

Dana 30 caliper for 6 bolt caliper bracket, RH

Fits: Jeep CJ-5 (1977-1978) w/ 6-Bolt Caliper Brackets. Jeep CJ-7 (1977-1978) w/ 6-Bolt Caliper Brackets.

Dana 30 caliper for 6 bolt caliper bracket, LH

Fits: Jeep CJ-5 (1977-1978) w/ 6-Bolt Caliper Brackets. Jeep CJ-7 (1977-1978) w/ 6-Bolt Caliper Brackets.

Dana 30 brake pad set for 6 bolt caliper

Fits: Jeep CJ-5 (1976-1977) Jeep CJ-5 (1978) w/ 6-Bolt Caliper Plate. Jeep CJ-7 (1976-1977) Jeep CJ-7 (1978) w/ 6-Bolt Caliper Plate.

Dana 30 brake pad set for 2 bolt caliper

Fits: Jeep CJ-5 (1978) w/ 2-Bolt Caliper Brackets. Jeep CJ-5 (1979-1981) Jeep CJ-7 (1978) w/ 2-Bolt Caliper Brackets. Jeep CJ-7 (1979-1981) Jeep CJ-8 (1981)

Dana 30 caliper for 2 bolt caliper bracket, LH

Fits: Jeep CJ-5 (1978-1981) w/ 2-Bolt Caliper Brackets. Jeep CJ-7 (1978-1981) w/ 2-Bolt Caliper Brackets. Jeep CJ-8 (1981)   Front Left Brake Caliper; Less Pads.

Disc brake conversion, AMC 20, drilled and slotted rotors

Disc brake conversion, AMC 20, drilled and slotted rotors Convert the rear end of your 1976-1986 Jeep CJ5/7/8 to disc brakes with our easy bolt on kit.    

Disc brake conversion, AMC 20

Convert the rear end of your 1976-1986 Jeep CJ5/7/8 to disc brakes with our easy bolt on kit.

Brake spring, lower anchor

Fits: Jeep M38-A1 (1952-1963) w/ 9″ Brakes. Jeep CJ-3B (1953-1968) w/ 9″ Brakes. Jeep CJ-5 (1955-1965) w/ 9″ Brakes. Jeep CJ-6 (1955-1965) w/ 9″ Brakes.   Front or Rear Lower Brake Shoe Spring

Brake shoe eccentric

Fits: Willys M38-A1 (1952-1963) w/ 9″ Brakes. Jeep CJ-3B (1953-1968) w/ 9″ Brakes. Jeep CJ-5 (1955-1965) w/ 9″ Brakes. Jeep CJ-6 (1955-1965) w/ 9″ Brakes.   2 Required Per Wheel.

Brake drum swage cutter kit, 1/2" stud

This is a low cost tool for you to cut the factory swage off the brake drum befopr pressing out the lug studs to change brake drums. The machine tool for this job is over $100, so we decided to give you another alternative. Slow on the drill press with...

Parking brake lever retainer c-clip

Parking brake lever retainer c-clips.   These are the clips that retain the parking brake lever on the brake shoe for common parking brake levers. These are the clips for parking brake levers: 83502899, 83504306, 937965 and 937964