Body

Rear bed floor hat channel, 1966-73 Jeepster/Commando

Cargo area brace replaces the original brace that provides support. This brace is to be welded under the mid section of the rear cargo area. Approximate size is 35.75″ long by 3.00″ wide. This brace fits side to side and requires welding...

Firewall lower brace, LH 1966-73 Jeepster/Command

Firewall lower brace, LH 1966-73 Jeepster/Commando This part is on driver side of the lower firewall. It connects to the right body frame braces and the lower firewall section where it meets the underside of the floor board. The left and right are...

Firewall lower brace, RH 1966-73 Jeepster/Commando

Firewall lower brace, RH 1966-73 Jeepster/Commando This part is on passenger side of the lower firewall. It connects to the right body frame braces and the lower firewall section where it meets the underside of the floor board. The left and right are...

Rear rocker panel to floor body mount, LH/RH 1966-73 Jeepster/Commando

Rear rocker panel to floor body mount,  LH/RH 1966-73 Jeepster/Commando New reproduction rear frame braces will fit driver and passenger side. Main frame braces are located under the mid body floor section and welds to inner rocker panel...

Front rocker panel to floor body mount, LH/RH 1966-73 Jeepster/Commando

Front rocker panel to floor body mount,  LH/RH 1966-73 Jeepster/Commando New reproduction front frame braces will fit driver and passenger side. Main frame braces are located under the front floor section andwelds to inner rocker panel. These...

Door entry step replacement panel, 1966-73 Jeepster/Commando

Door entry step replacement panel, 1966-73 Jeepster/Commando   New reproduction door step fits driver and passenger side, but sold separately. Fits bottom door entry flat area. The top portion of door will attach to front floor pan and the...

Rear floor rear hat channel section with body mount captured nuts, 66-73 Jeepster/Commando

Rear floor rear hat channel section with body mount captured nuts, 66-73 Jeepster/Commando This is the bed hat channel right over the rear crossmember This is the steel piece for the rear of the body. This has the mating hardware for the two rear body...

Front floor seat mounting brace, Jeepster/Commando, RH Front

New replacement under body seat brace is located directly under front passenger seat bolts. Braces weld to under side of floor pan. Mated hardware pre-welded for easy installation. 1 Required - This will fit driver side front and rear and passenger...

Front floor seat mounting brace, Jeepster/Commando, LH Front/LH Rear/RH Rear

Front floor seat mounting brace, Jeepster/Commando, LH Front/LH Rear/RH Rear New replacement under body seat brace is located directly under front seat bolts. Braces weld to under side of floor pan. Mated hardware pre-welded for easy installation. 3...

Bed floor front hat channel section with body mount captured nuts, 66-73 Jeepster/Commando

Rear floor front hat channel section with body mount captured nuts New replacement underbody frame to cross member brace, just above rear wheel well. Welds to bottom of body and attaches to the driver side and passenger side frame mount body brace. Made...

Wavy washer for tailgate arms 1966-73 Jeepster/Commando

Wavy washer on 1966-73 Jeepster/Commando shouldered tailgate arm bolts and Tailgate latch on: 1976-1977 Jeep CJ7 1981-1986 Jeep CJ7 1981-1985 Jeep Scrambler

Inner rocker panel, Jeepster/Commando

Inner rocker repair panels, sold as set, left and right side. A must for your restoration to replace high rust areas. Easy weld-in replacement.  Made in the USA. Fits: 1967-1971 Jeepster Commando 1972-1973 Commando