Steering

pitman arm, manual Saginaw

Fits: Jeep CJ-5 (1972-1975) w/ Manual Steering. Jeep CJ-6 (1972-1975) w/ Manual Steering. Jeep C104 Commando (1972-1973) w/ Manual Steering.

Power steering conversion intermediate shaft

This is a custom intermediate shaft with HEIM join to bypass the stock forward facing 225V6 exhaust without modification and add power steering. This is just one of the components you need if your doing it yourself. Center support bracket locates on...

Tie rod tube, 36-1/2" long, 11/16" thread

Tie rod tube, 36-1/2" long with 11/16" LH and RH threads This is the key to converting your center bell crank steering to a 67-71 tie rod system

Power steering pitman arm nut and lock washer

Pitman arm nut and lock washer for power steering gear 1100   Common size for most power steering gears

Power steering gear

Power steering gear, with inverted flare hose connections, 4 bolt box. FEATURES & BENEFITS - Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. - Each component is carefully...

Tie rod end rubber boot

Tie rod end boot   Fits: Willys MB (1941-1945). Jeep CJ-2A (1945-1949). Jeep CJ-3A (1948-1953). Jeep CJ-3B (1953-1968). Jeep CJ-5 (1955-1971). Jeep CJ-6 (1955-1971).   Tie Rod End Boot For All Tie Rods...

Horn button repair kit

Horn button kit   Fits: Jeep CJ-3B (1963-1968) w/ 2-3/8″ button. Jeep CJ-5 (1963-1975) w/ 2-3/8″ button. Jeep CJ-6 (1963-1971) w/ 2-3/8″ button. Jeep FC-150 (1963-1964) w/ 2-3/8″ button...

Steering box bracket grade 8 hardware kit

Steering box hardware kit with spacers   Fasten your stock bracket or aftermarket bracket to your frame PROPERLY! This kit includes instructions, all grade 8 hardware and file-to-fit steel frame spacers

Ross box pitman arm

Ross manual steering box pitman arm   Fits: Willys M38 (1950-1952). Willys M38-A1 (1952-1963). Jeep CJ-5 (1955-1971). Jeep CJ-6 (1955-1971).

Pitman arm lock washer

Pitman arm lock washer, power steering Fits Vintage Jeep: Jeep CJ-5 (1972-1986). Jeep CJ-6 (1972-1975). Jeep CJ-7 (1976-1986). Jeep CJ-8 (1981-1986). Jeep SJ & J-Series (1972-1991). Jeep Wrangler...

Steering stabilizer replacement cylinder

SPECIFICATIONS Shock Boot Included:Shock Boot Not Included Single / Dual:Single Beam Distance (Low):Twin Tube Brackets Included:Brackets Not Included Position:Front Fitment:Direct Fit Type:Stabilizer Only Series:Extreme-Duty Series Rubicon...

Steering worm gear bearing set

Steering worm gear bearing kit   Fits: Willys MB (1941-1945). Jeep CJ-2A (1945-1949). Jeep CJ-3A (1948-1953). Jeep CJ-3B (1953-1968). Jeep CJ-5 (1955-1971) w/o gear stamped #TL-13019. Jeep CJ-6 (1955-1971) w/o...