Pilot bushing, AMC 232/258/304

Pilot bushing   Fits: Jeep CJ-5 (1972-1975) w/ 3.8L, 4.2L or 5.0L engine. Jeep CJ-6 (1972-1975) w/ 3.8L, 4.2L or 5.0L engine. Jeep C104 Commando (1972-1973) w/ 4.2L or 5.0L engine. Jeep SJ & J-Series (1972-1979) w/ 5...

Timing cover, AMC 304/360/401

Timing Cover 1-Piece Plain aluminum, Natural Gaskets Included

Oil dipstick and tube kit, AMC 304/360/401

Oil dipstick and tube Fits: Jeep CJ-5 (1975-1981) w/ 5.0L engine. Jeep CJ-6 (1975) w/ 5.0L engine. Jeep CJ-7 (1976-1981) w/ 5.0L engine. Jeep CJ-8 (1981) w/ 5.0L engine. Jeep SJ & J-Series (1974-1991) w/ 5.9L engine...

Exhaust manifold gasket set, AMC 304 V8

Exhaust manifold gasket set for AMC 304 V8

Air cleaner to valve cover breather tube

Air cleaner to valve cover breather tube with 232 or 258 engine Fits: Jeep CJ-5 (1971-1975) w/ 3.8L engine. Jeep CJ-5 (1975) w/ 4.2L engine. Jeep CJ-6 (1971-1975) w/ 3.8L engine. Jeep CJ-6 (1975) w/ 4.2L engine. Jeep C104...

Valve cover to air cleaner filter

Valve cover to air cleaner filter. This goes inside the dry element air cleaner and connects to the breather hose from the valve cover

Ignition coil, 12V

12 volt ignition coil

Oil Pan Drain Plug

Oil Pan Drain Plug Fits: Jeep CJ (1966-1978) w/ 3.8L engine. Jeep CJ (1971-1986) w/ 4.2L engine. Jeep CJ (1971-1981) w/ 5.0L engine. Jeep C104 Commando (1972-1973) w/ 4.2L or 5.0L engine. Jeep SJ &...

Heater Hose Kit

Heater Hose Kit Includes: 7' of premium heater hose 5/8" 4 Stainless steel hose clamps   FYI: Jeepster Commando lengths: 37" from outside heater core tube to back of intake manifold elbow fitting 34" from inside heater core tube to water...

Heater Hose, per foot

Premium 5/8" heater hose, black and sold by the foot. Typically you would need 6-7 feet for both lines, measure just to be sure before ordering.

Heater Hose Clamp

Heater hose clamp, stainless steel. Checkout the heater hose kit #680232K for all your heater hose replacement needs.

Spark plug wires, HEI

Spark plug wires, black Universal 8.5mm wires that come with stock and HEI terminal ends. You route and install ends for clean look!