1955-86 JEEP CJ5/CJ6

Brake line tube nut, 1/2" x 3/16" brake line

Master cylinder brake tube nut 1/2"-20 NF for 3/16 tube size.  Tube size can be changed by drilling out to 1/4" for 1/4" brake lines.  Price is per nut.

Fresh air box hose ducting kit

Fresh air duct to heater hose kit   Fits: 1966-1971 Jeepster Commando 1972-1973 Jeep Commando 1972-1986 Jeep CJ 5-1/2 duct that is easily made into oval for Jeepster Commando use Comes 15" pre-cut, cuffed and two clamps

Heater core

Heater core, fits 1967-1973 Jeepster Commando and Jeep Commando, 1972-1977 Jeep CJ models

Dana 18 gasket kit

This transfer case gasket and seal kit fits all 41-71 Willys and Jeep models with a Dana 18 transfer case.

Steering Shaft Joint Assembly

Steering column joint, part number 990192 for 1972-1975  JEEP CJ5, CJ6, and JEEP Commando with manual Saginaw steering.  Also fits 1970-1971 Jeep Commando with manual Saginaw steering. Includes grease zerk fitting.  Shaft sizes...

Speedometer cable, 3 Speed manual 60" long

Speedo Cable 3 Speed Transmission Fits: Willys MB (1941-1945) w/ T84 Transmission; 60″ Long. Jeep CJ-2A (1945-1949) w/ T90 Transmission; 60″ Long. Jeep CJ-3A (1948-1953) w/ T90 Transmission; 60″ Long. Jeep...

Clutch cable 74"

Clutch cable 74" long.  Fits: 1972 CJ5, CJ6 and CJ7 with 304 motors 72/73 Jeep Commando with S6 or V8

Jeep CJ hood insulation kit

1976-1986 Jeep CJ-5, CJ-7 & Scrambler CJ-8 hood insulation  Replacement hood insulation, helps cut down on heat and engine noise.Just apply glue to hood and insulation piece and stick it right on!May require slight trimming to fit perfectly...

Axle bearing kit for Dana 44 flanged

Dana 44 rear flanged outer bearing kit.  Includes 18, 19, 20, 21, & 22 in the diagram.

Clutch Rod Ball Joint

Clutch Rod Ball Joint, number 15 in diagram   Fits: Jeep CJ-5 (1972-1975). Jeep CJ-6 (1972-1975). Jeep Commando (1972-1973) Other cross referance part number 8126777

Lug Stud 1/2-20, C101 tapered rear

  Front Hub Stud; Right Hand Threads: Fits: Willys M38 (1950-1952). Willys M38-A1 (1952-1963). Jeep CJ-3A (1948-1953). Jeep CJ-3B (1953-1968) w/ Bearing Marked 18590. Jeep CJ-5 (1955-1965) w/ Bearing Marked 18590...

Hood to grill bumper, 1/4" thick, 1972-86 CJ5/7/8 and 1991-93 YJ

Fits Jeep: Jeep Wrangler (YJ) (1991-1993); Venezuela & Egypt Only. Fits Vintage Jeep: Jeep CJ-5 (1972-1983). Jeep CJ-7 (1976-1986). Jeep CJ-8 (1981-1986).   Prevents Hood From Contacting The Grille; 1/4″...