Electrical / Instruments

Ignition rotor, 4 cyl

Ignition rotor, 4 cyl   Fits: Jeep CJ-3B (1953-1968) w/ 4-134 F-Head engine; w/ Distributor Tag #: IAT-4401. Jeep CJ-5 (1955-1971) w/ 4-134 F-Head engine; w/ Distributor Tag #: IAT-4401. Jeep CJ-6 (1955-1971) w/ 4-134 F-Head...

Ignition points, 4cyl

Ignition points: Fits: Willys MB (1941-1945) w/ 4-134 L-Head engine. Willys M38 (1950-1952) w/ 4-134 L-Head engine. Willys M38-A1 (1952-1963) w/ 4-134 F-Head engine. Jeep CJ-2A (1945-1949) w/ 4-134 L-Head engine. Jeep...

Tail light socket repair pigtail, Single pin

Single pin repair pigtail for common tail light housings. This is for the 1156 style bulb, backup light single pin   Double pin is also available #TLRK5221

Tail light socket repair pigtail, double pin

Double pin repair pigtail for common tail light housings. This is for the 1157 style bulb, tail and brake/turn   Single pin is also available #TLRK5220

Ignition points, 4 Cyl 134ci

Ignition point set, 4cyl 134ci

Ignition condenser 4 Cyl 134ci

Ignition condenser

Gauge cluster light dimmer

New solid state instrument light dimmer switch. This is a replacement for the resistance wire version under the dash that often fails, burns up or is missing altogether.   This will work with LED dash lights as well. Slight modification to the...

Firewall grommet assembly

Firewall grommet assembly. Replace those old crumbling rubber grommets and rusty rings with BRAND NEW!! Our own reproduction of the firewall grommet with the retainer and screws. This grommet is made like the original with the large 9/16" hole in the...

Voltage regulator, Motorola type

Motorola type voltage regulator for 225 V6, Jeepster Commando and CJ 5/6

Ignition switch connector housing, deluxe kit

Ignition switch housing with new spade terminals. This is the plug that goes into your ignition switch. These get burn out and cracked, causing all kinds of problems. Simply remove old plug, trim back old terminals (very minimal) install new...

No hole dash plate with mounting hardware

No hole dash plate made from a template of the exact opening of the dash, cut on a water jet cutter.  What's different on the plate id it is not a rectangle, this plate fits the exact contour of the cut out on your dash Four 8/32" stainless steel...

No Hole Dash Plate with lights and mounting hardware

No hole dash plate including mounting bolts/washer/nuts, 2 green turn lights, 1 amber high beam light indicator light  Made from a template of the exact opening of the dash, cut on a water jet cutter. Four 8/32" stainless steel allen heads with...