Steering

Drag link tube

Fits: Willys M38 (1950-1952).Willys M38A1 (1952-1963).Jeep CJ-2A (1945-1949); After serial #22972.Jeep CJ-3A (1948-1953); After serial #22972.Jeep CJ-3B (1953-1968).Jeep CJ-5 (1955-1971).Jeep CJ-6 (1955-1971)...

Drag link kit, conversion link for Ross to Saginaw

Correct tie rod assembly from the pitman arm to the double hole tie rod on the steering tie rod when converting to Saginaw manual/power steering (see diagram and photo). # 1 in diagram   Drag link rod Left tie rod end part  Right tie rod...

Tie rod end, LH

  Steering tie rod end Fits: Jeep (1941-1986); w/ Left Hand Thread; Passenger Side.

Tie rod end, RH

Steering Tie Rod End   Fits: Jeep (1941-1986); w/ Right Hand Thread; At Pitman Arm; Driver Side.

Tie Rod Clamp

Tie rod clamp. Inner or Outer Tie Rod Clamp for Left or Right Tie Rod Assembly; Includes Clamp and Hardware    Fits: Willys MB (1941-1945). Willys M38 (1950-1952). Willys M38-A1 (1952-1963). Jeep CJ-2A (1945-1949). Jeep CJ-3A...

Steering Tube & Clamps

Steering tube and 2 clamps, tube is 4.5 inch long 11/16" thread.  Letter G in the diagram  

Drag link 24"

This long drag link: 72-83 Jeep CJ-5s 72-73 Jeep Commando 70-71 Jeepster Commando 76-81 CJ-7s.   11/16" thread by 24 inches long.

Steering column bushing lower with hardware

Lower steering bushing.    Fits columns with Saginaw steering starting in 1970-1971.  Number 10.346-1 in the diagram.  Comes with correct mounting hardware. People have been using these bushings on all kinds of cars so here are...

Lower steering column bushing kit

Lower steering column bushing. Fits steering columns with Ross steering pre 1970.  Number 27 in the diagram.  Comes with correct mounting hardware.

Drop pitman arm manual Saginaw

3" drop down pitman arm.  Fits the following Jeeps with manual Saginaw steering gearbox. 1.0795" ID 32 spline. 1970-1971 Jeepster Commando 1972-1973 Jeep Commando 1984-1993 Jeep Cherokee (XJ)          

Steering column seal

Seal, steering column seal to floor.  Number 39 in the diagram.  We also carry the flange for this gasket, number 38 in the diagram.   This is a Partsdude4x4 exclusive part.

Steering column retainer flange

Steel flange for steering columm, fits 1967-1973 Jeepster Commando, Jeep Commando.  Number 38 in the diagram.   This is a Partsdude4x4 exclusive part