Suspension

Spring plate, 2" wide front spring, RF

Fits: Jeep CJ-5 (1976-1983) Jeep CJ-7 (1976-1986) Jeep CJ-8 (1981-1986) Jeep Commando (1972-1973) You can either leave the stabilizer stud or cut it off   RF 2" Leaf Spring Plate; Includes Stabilizer Link Stud. Dana 30

Spring plate, left front

Fits: Jeep CJ-5 (1976-1983). Jeep CJ-7 (1976-1986). Jeep CJ-8 (1981-1986).   Front Left Leaf Spring Plate; Includes Stabilizer Link Stud. For 2" wide springs Dana 30 axle

Shock stud, threaded

Generic shock stud. You can replace a bent or broken stud by welding this in place or thread it in to a nut. Replace the early cotter pin shock stud with these to eliminate the frustration! Can add to spring plate for dual shocks or a sway bar end...

Front shock absorber

Front Shock absorber for: Frontend or rearend Ross steering Jeeps, stock height and Rearend shock for Ross steering Jeeps, stock height   Quality Monroe 31000 series gas charged shock with 10 stage valving.   How to determine...

Rear shock absorber for Saginaw steering Jeeps

Rear Shock absorber for front steering Jeeps, stock height Quality Monroe 31000 series gas charged shock with 10 stage valving.   How to determine if you have a front or rear steering Jeep: Front steering Jeeps, the steering box either...

U-Bolt HD multi leaf 1/2" x 7"

Fits: Willys M38-A1 (1952-1963) w/ Dana 44 Rear Axle. Jeep CJ-3A (1948-1953) w/ Dana 44 Rear Axle. Jeep CJ-3B (1953-1968) w/ Dana 44 Rear Axle. Jeep CJ-5 (1955-1975) w/ Dana 44 Rear Axle. Jeep CJ-6 (1955-1975) w/ Dana 44...

Ball joint kit, Dana 30/44, one side

Ball joint kit for open knuckle Dana 30 front end. Both upper and lower ball joints with all the hardware to replace the ball joints. This kit does one side.  Black boots (blue shown in picture is just shipping protector for the...

Steering coupler for manual Saginaw

Steering coupler with hardware.  Fits: 76-86 CJ's 73-86 FSJ 70-73 Jeepster/Commando with manual Saginaw steering

Shock Bushing

Shock absorber mounting pin bushing, 4 required per shock, fits front and rear shocks.  Number 4 in the diagram.  

Front spring bushing

Front spring bushing rear eye 1976-1986 CJ 7.  Fits 2" front spring rear eye

Bump stop

Bump stop fits 1941-1975 axlesBump stop (4 required) . Bump stop fits 1941-1975 axles

Shackle kit for 2-1/2" wide rear spring,

Rear shackle kit for 2 1/2" springs.  Includes numbers 5, 6, 7, & 4 in the diagramFits rear springs with 2 1/2": 67-73 Jeepsters and Commandos 1976-1986 CJ-7. Kit includes shackle, bushings, bolts, and nuts. Kit is for one spring